PORSCHE 911 ENGINE BUILD
Can't find what you need? Try browsing the Accessories or Exploded Diagrams!<-- Try narrowing by car using the menu to the left.
This is the cylinder to engine case gasket, it is a high-quality OEM replacement, designed to perform like the original. We source this part in Germany to ensure quality, reliability and precise fitment. Sold individually. 6 necessary per car.
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.
View/Change Diagram
From $5.00
Make a selection
Oem chain case gaskets Porsche 996tt 01-05
Rebuilding your engine is a process that should be done right. Replace your chain case gasket to ensure a proper fit without leakage. Sold as a pair.
*contact us for special pricing.*
View/Change Diagram
From $21.60
Make a selection
We are proud to offer a wide assortment of OEM Porsche parts. Nobody knows more about your car, then its creators themselves. You dont have to question the build quality, attention to detail, or reliability of these. Why trust anyone else?
factory replacement filter, direct from Porsche. Porsche recommends checking the air filter every 15,000 miles, and replacing them every 30,000 miles. Make sure youre not choking your engine for air!
Fits:: GT3 & GT3 rs - 2010-2012 turbo - 2008-2012 file photo shown, actual filter will vary.
General Fitment 911 TURBO/GT2 2007-09 911 GT3 2007-11
"brombacher" exhaust system for 997 GT3/rs (sound version) with rsr style tips
Facts:
- + 25 crank hp & + 25 crank torque
- 200 cell high flow, tri metal German hjs sport catalysts
- 2 3/4" tubing (70 mm) straight through design for max. Power
- equal length header set up with merge collector for maximum torque gain
- weighs 71 lbs. (32,2 kg)
- 15.5 lb (7 kg) weight savings over stock
- t 316 stainless steel for improved durability over t 304
- includes all necessary clamps and mounting brackets
- 2 x 2 3/4" (70mm) angle cut rsr center exit tips
- made in Germany
- 98 db (98db at idle and partial throttle, builds to 100db at wot)
- intoxicating growl at idle, partial throttle and wide open ...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11
$8,507.40
Make a selection
The initial seat pressure was raised slightly to minimize
Valve float. Good for 7500 rpm. A sound replacement
For older engines during routine rebuild.
Fits: turbo 3.6 (93-94), turbo 3.3 (91-92), cup-race (90-93), turbo-look (91-94), rs (92-92), c4 (89-94), c2 (90-94), 916 (70-76), 914-6 (70-76), turbo 3.3 (78-89), turbo 3.0 (75-77), 3.2 (84-89), SC 3.0 (78-83), 3.0 Carrera (76-77), rs 2.7 (74-76), 911 2.7 (74-77), rs (73-73), 911s (70-73), 911tk (73-73), 911tv (72-73), 911te (72-73), 911e (70-73), 911t (70-71), 911l (68-68), 911s (67-69), 911e (69-69), 911t (68-69), 911 (65-68)
General Fitment 911 1989-94 914 1970-76 911 1970-73
From $635.52
Make a selection
Kit includes:
Ecu exchange for non e-throttle models (fast load for e-throttle models), power-flow kit
Genuine:
Engine - 6 cylinder boxer
Capacity - 3387ccm
Compression ratio - 11,3:1
Max. Power - 221kw (300hp) @ 6800rpm
Max. Torque - 350nm (258lbf ft) @ 4600rpm
Max. Speed - 280km/h
Max. Rpm - 7300rpm
Acceleration 0-100km/h - 5.2s
Tuning:
Max. Power - 232kw (315hp) @ 7000rpm
Max. Torque - 360nm (266lbf ft) @ 5000rpm
Max. Speed - 285km/h
Max. Rpm - 7500rpm
Acceleration 0-100km/h - 5.0s
For 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. Our deep understanding of the flat 6 Porsche engine naturally led to our engine management soft...(choose a part on the right to read more)
General Fitment 911 1998-05
$1,205.60
Make a selection
Kit includes:
Ecu exchange for non e-throttle models (fast load for e-throttle models), power-flow kit, header system, sportmufflers
Genuine:
Engine - 6 cylinder boxer
Capacity - 3387ccm
Compression ratio - 11,3:1
Max. Power - 221kw (300hp) @ 6800rpm
Max. Torque - 350nm (258lbf ft) @ 4600rpm
Max. Speed - 280km/h
Max. Rpm - 7300rpm
Acceleration 0-100km/h - 5.2s
Tuning:
Max. Power - 239kw (325hp) @ 7000rpm
Max. Torque - 370nm (273lbf ft) @ 4500rpm
Max. Speed - 287km/h
Max. Rpm - 7500rpm
Acceleration 0-100km/h - 4.9s
For 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. Our deep understanding of the flat 6 Porsche engine naturally led...(choose a part on the right to read more)
General Fitment 911 1998-05
$8,149.90
Make a selection
Kit includes: software genius flash tool , sport air filter, exhaust system GT with 90mm endtips and 200 cell sportcatalytic, ipd with 82 mm throttlebody. Genuine: engine - 6 cylinder boxer capacity - 3600ccm compression ratio - 11,7:1 max. Power - 280kw (381hp) @ 7400rpm max. Torque - 385nm (284lbf ft) @ 5000rpm max. Speed - 312km/h max. Rpm - 8000rpm acceleration 0-100km/h - 4.6s tuning: max. Power - 308kw (420hp) @ 7500rpm max. Torque - 450nm (295lbf ft) @ 5000rpm max. Speed - 320km/h max. Rpm - 8200rpm acceleration 0-100km/h - 4.1s for 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. Our deep understanding of the flat 6 Porsche engine naturally led ...(choose a part on the right to read more)
General Fitment 911 GT3 2003-05
From $10,481.65
Make a selection
Kit includes:
Software fast load dme, sport air filter, header system, sportmufflers and endtips 3,8l to fit the mufflers to the bumper.
Genuine:
Engine - 6 cylinder boxer
Capacity - 3596ccm
Compression ratio - 11,3:1
Max. Power - 239kw (325hp) @ 6800rpm
Max. Torque - 370nm (273lbf ft) @ 4250rpm
Max. Speed - 285km/h
Max. Rpm - 7300rpm
Acceleration 0-100km/h - 5.0s
Tuning:
Max. Power - 259kw (352hp) @ 7000rpm
Max. Torque - 400nm (295lbf ft) @ 4500rpm
Max. Speed - 300km/h
Max. Rpm - 7500rpm
Acceleration 0-100km/h - 4.7s
For 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. Our deep understanding of the flat 6 Porsche engine naturally...(choose a part on the right to read more)
General Fitment 911 2005-08
$5,337.20
Make a selection
Kit includes:
Ecu exchange for non e-throttle models (fast load for e-throttle models), power-flow kit, header system, sport catalytic kit, sport camshafts
Genuine:
Engine - 6 cylinder boxer
Capacity - 3387ccm
Compression ratio - 11,3:1
Max. Power - 221kw (300hp) @ 6800rpm
Max. Torque - 350nm (258lbf ft) @ 4600rpm
Max. Speed - 280km/h
Max. Rpm - 7300rpm
Acceleration 0-100km/h - 5.2s
Tuning:
Max. Power - 246kw (335hp) @ 7000rpm
Max. Torque - 385nm (284lbf ft) @ 5000rpm
Max. Speed - 292km/h
Max. Rpm - 7500rpm
Acceleration 0-100km/h - 4.7s
For 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. Our deep understanding of the flat 6 porsc...(choose a part on the right to read more)
General Fitment 911 1998-05
$8,958.40
Make a selection
Kit includes:
Software fast load, sport air filter, sportmuffler (100 cell sport catalytic), k24-race turbocharger l/r
Genuine:
Engine - 6 cylinder boxer twin-turbo
Capacity - 3600ccm
Compression ratio - 9,4:1
Max. Power - 340kw (462hp) @ 5700rpm
Max. Torque - 620nm (457lbf ft) @ 3500-4500rpm
Max. Speed - 318km/h
Max. Rpm - 6750rpm
Acceleration 0-100km/h - 4.0s
Tuning:
Max. Power - 397kw (540hp) @ 7000rpm
Max. Torque - 760nm (561lbf ft) @ 4500rpm
Max. Speed - 331km/h
Max. Rpm - 7000rpm
Acceleration 0-100km/h - 3.6s
For 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. Our deep understanding of the flat 6 Porsche engine naturally le...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2001-05
$14,998.41
Make a selection
Kit includes:
Software fast load, sport air filter
Genuine:
Engine - 6 cylinder boxer
Capacity - 3596ccm
Compression ratio - 11,3:1
Max. Power - 239kw (325hp) @ 6800rpm
Max. Torque - 370nm (273lbf ft) @ 4250rpm
Max. Speed - 285km/h
Max. Rpm - 7300rpm
Acceleration 0-100km/h - 5.0s
Tuning:
Max. Power - 250kw (340hp) @ 7000rpm
Max. Torque - 390nm (288lbf ft) @ 4500rpm
Max. Speed - 300km/h
Max. Rpm - 7500rpm
Acceleration 0-100km/h - 4.8s
Kit includes:
Software fast load, sport air filter, GT sport exhaust system
Genuine:
Engine - 6 cylinder boxer
Capacity - 3824ccm
Compression ratio - 11,8:1
Max. Power - 261kw (355hp) @ 6600rpm
Max. Torque - 400nm (295lbf ft) @ 4600rpm
Max. Speed - ...(choose a part on the right to read more)
General Fitment 911 2005-08
$1,206.70
Make a selection
Kit includes:
Software fast load, sport air filter, GT sport exhaust system
Genuine:
Engine - 6 cylinder boxer
Capacity - 3824ccm
Compression ratio - 11,8:1
Max. Power - 261kw (355hp) @ 6600rpm
Max. Torque - 400nm (295lbf ft) @ 4600rpm
Max. Speed - 293km/h
Max. Rpm - 7300rpm
Acceleration 0-100km/h - 4.8s
Tuning:
Max. Power - 290kw (395hp) @ 6500rpm
Max. Torque - 441nm (325lbf ft) @ 4000rpm
Max. Speed - 307km/h
Max. Rpm - 7500rpm
Acceleration 0-100km/h - 4.4s
For 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. Our deep understanding of the flat 6 Porsche engine naturally led to our engine management software. Over the years we h...(choose a part on the right to read more)
General Fitment 911 2005-08
$9,896.70
Make a selection
Kit includes:
Software fast load., sport air filter, sportmuffler (100 cell sport catalytic), k24/26 turbocharger l/r, 5.0bar fuel-pressure-regulator, air-powerflow kit
Genuine:
Engine - 6 cylinder boxer twin-turbo
Capacity - 3600ccm
Compression ratio - 9,4:1
Max. Power - 340kw (462hp) @ 5700rpm
Max. Torque - 620nm (457lbf ft) @ 3500-4500rpm
Max. Speed - 318km/h
Max. Rpm - 6750rpm
Acceleration 0-100km/h - 4.0s
Tuning:
Max. Power - 423kw (575hp) @ 6500rpm
Max. Torque - 780nm @ 4500rpm
Max. Speed - 335km/h
Max. Rpm - 7000rpm
Acceleration 0-100km/h - 3.4s
For 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. Our deep understanding of ...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2001-05
$21,571.48
Make a selection
Also included with our latest software version for the 997tt & GT2 is a free single user license for durametric basic software, allowing you to read out and diagnose fault conditions on your vehicle.
Genuine:
Engine - 6 cylinder boxer twin-turbo
Capacity - 3600ccm
Compression ratio - 9,0:1
Max. Power - 353kw (480hp) @ 6000rpm
Max. Torque - 620nm (457lbf ft) @ 1950-5000rpm
Max. Speed - 310km/h
Max. Rpm - 6800rpm
Acceleration 0-100km/h - 3.9s
Tuning:
Max. Power - 390kw (530hp) @ 6000rpm
Max. Torque - 720nm (531lbf ft) @ 3000-4000rpm
Max. Speed - 320km/h
Max. Rpm - 7000rpm
Acceleration 0-100km/h - 3.7s
FVD-Brombacheris proud to announce that we are now offering do-it-yourself flash load ecu ...(choose a part on the right to read more)
General Fitment 911 2005-08
$1,754.50
Make a selection
We are an authorized reseller and installer of jrz suspension. As racing enthusiasts ourselves, we know that the best suspension for street or for track is by jrz. With years of engineering, race testing, and winning, jrz provide the driver with the best possible handling vehicle for their driving needs.
Jrz rs street coilovers Porsche 993 94-98 fits all models: c2, c4, tt
The rs damper allows for external adjustment of both the rebound and compression functions of the damper. In addition to the same precise and accurate rebound adjustment as in the single adjustable race damper, the rs are double adjustable. The compression adjustment technology is the same as that of the race version. The rs does not utiliz...(choose a part on the right to read more)
General Fitment 911 1994-98
$7,155.00
Make a selection
Over 20 years of continuous exhaust development and technical expertise are drawn upon to develop the ultimate milltek sport range of performance products. Milltek sport offer an ever expanding comprehensive selection of performance exhausts which build on the successes of key marques like audi, volkswagen, Porsche, mini and bmw. This has placed milltek sport at the forefront of tuning companies and owners must have list.
milltek sport exhausts are produced in high quality type 304 aircraft grade stainless steel. This material is anti-magnetic and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of the silencer. Mandrel bending ensu...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2001-05
$4,750.65
Make a selection
Have you lost your engine sheet metal screws and can’t find the substitutes? You’ll need many of these screws when rebuilding, as lost and broken screws are common. These shiny, plated screws also dress up your rebuild.
View/Change Diagram
From $1.00
Make a selection
Racingbrake rotors are engineered and manufactured to meet the needs of the performance enthusiasts. from 3d cad design to tooling development, casting, machining, and surface coating, rb controls all production processes to insure quality, performance, and value. Their patented designs, combined with proprietary alloyed cast iron and precision machining assure you that rb brake products will achieve the highest level of performance.
These two-piece rotors were engineered to be the best stock replacement two-piece rotor on the performance market. This rotor is direct bolt-on, easy to install, no additional hardware needed, and an excellent upgrade for both street and track. Not only will the rotors last ...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2001-05 911 2005-08 911 GT3 2007-11 911 TURBO/GT2 2007-09 BOXSTER 2005-08 CAYMAN 2006-08
$1,500.80
Make a selection
This K&N performance gold filter fits the billet full-flow spin-on filter adapter kit, part number r10601. This filter uses a synthetic resin impregnated filter media capable of filtering lower micron particles while not restricting oil flow. Performance gold oil filters are designed to satisfy the needs of racers and engine builders as well as the average vehicle owner who wants the best oil filter available. K&N cartridge oil filters trap harmful contaminants while the filter’s construction allows for high oil flow rates. All K&N oil filters are manufactured to meet stringent engineering standards. They are covered by a limited warranty to be free from defects in materials and workmanship when installed and...(choose a part on the right to read more)
General Fitment BOXSTER 1997-04 BOXSTER 2005-08 CAYMAN 2006-08 911 2005-08 911 1998-05
Racingbrake rotors are engineered and manufactured to meet the needs of the performance enthusiasts. from 3d cad design to tooling development, casting, machining, and surface coating, rb controls all production processes to insure quality, performance, and value. Their patented designs, combined with proprietary alloyed cast iron and precision machining assure you that rb brake products will achieve the highest level of performance.
These two-piece rotors were engineered to be the best stock replacement two-piece rotor on the performance market. This rotor is direct bolt-on, easy to install, no additional hardware needed, and an excellent upgrade for both street and track. Not only will the rotors last ...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2001-05 911 2005-08 911 GT3 2007-11 911 TURBO/GT2 2007-09
$2,496.15
Make a selection
Over 20 years of continuous exhaust development and technical expertise are drawn upon to develop the ultimate milltek sport range of performance products. Milltek sport offer an ever expanding comprehensive selection of performance exhausts which build on the successes of key marques like audi, volkswagen, Porsche, mini and bmw. This has placed milltek sport at the forefront of tuning companies and owners must have list.
milltek sport exhausts are produced in high quality type 304 aircraft grade stainless steel. This material is anti-magnetic and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of the silencer. Mandrel bending ensu...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2001-05
$4,588.65
Make a selection
Over 20 years of continuous exhaust development and technical expertise are drawn upon to develop the ultimate milltek sport range of performance products. Milltek sport offer an ever expanding comprehensive selection of performance exhausts which build on the successes of key marques like audi, volkswagen, Porsche, mini and bmw. This has placed milltek sport at the forefront of tuning companies and owners must have list.
milltek sport exhausts are produced in high quality type 304 aircraft grade stainless steel. This material is anti-magnetic and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of the silencer. Mandrel bending ensu...(choose a part on the right to read more)
General Fitment 911 1998-05 911 2005-08
$1,753.65
Make a selection
Over 20 years of continuous exhaust development and technical expertise are drawn upon to develop the ultimate milltek sport range of performance products. Milltek sport offer an ever expanding comprehensive selection of performance exhausts which build on the successes of key marques like audi, volkswagen, Porsche, mini and bmw. This has placed milltek sport at the forefront of tuning companies and owners must have list.
milltek sport exhausts are produced in high quality type 304 aircraft grade stainless steel. This material is anti-magnetic and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of the silencer. Mandrel bending ensu...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2010-13
$1,659.15
Make a selection
Over 20 years of continuous exhaust development and technical expertise are drawn upon to develop the ultimate milltek sport range of performance products. Milltek sport offer an ever expanding comprehensive selection of performance exhausts which build on the successes of key marques like audi, volkswagen, Porsche, mini and bmw. This has placed milltek sport at the forefront of tuning companies and owners must have list.
milltek sport exhausts are produced in high quality type 304 aircraft grade stainless steel. This material is anti-magnetic and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of the silencer. Mandrel bending ensu...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2001-05
© 2024 Automobile Atlanta Inc.
505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844
|